About Us.............. |......... Products........| ........ SDS ..........| ........Contact

Brill

Note: The kit is sold in the proper mixing ratio, so that you can mix the total of the two units together to achieve the proper working solution. However, if you purchase a larger kit, and want to mix small batches at a time, then you would mix them as follows; i.e. eleven parts Unit 1 and one part Unit 2.

If the items to be treated are heavily contaminated, particularly with grease or oils, then they should be cleaned and/or degreased prior to immersion in Arcal Brill.

Immerse, or apply to work pieces in the proportionately mixed Brill solution for about 30 to 60 seconds, depending on the condition of the surface; remove the pieces and rinse thoroughly with running water.

The items may be neutralized afterwards using a mild alkli solution such as Arcal 163-A neutralizer.

To prevent future oxidation a fine coating such as Arcal Copper Protect may be used.

Area of Application:

Arcal Brill is an innovative, two part formulation with mineral acids, surface conditioners, brighteners and anti-soil deposition agents. Arcal Brill effectively degreases and deoxidizes the surface to produce a mirror-like finish on copper, brass, bronze and other copper alloys. Brill can be used on like composed statuary, parts, sheets, railings, and antiques.

Properties:

  • Appearance/Odor: Clear Solution w/acid odor
  • Specific Gravity: 1.57 (Ready to use solution)
  • pH of 1% Solution: 1 to 2
  • Solubility in Water: Soluble

Application Instructions:

Brill is purchased as a two component kit. Part 1 and Part 2. When mixed together they are then ready for your cleaning operation. (Do not mix together until you are ready to do your work.


This information is believed to be authentic and correct as determined by laboratory and field-testing. No warranty or guaranteed results are express or implied due to application circumstances and usage beyond the control of the seller or manufacturer.

Arcal Chemicals, Inc.223 Westhampton Avenue Capitol Heights, MD 20743 - Map - Tele: 301.336.9300 Fax: 301.336.6597

Copyright Arcal Chemicals, Inc. 2001