About Us.............. |......... Products........| ........ SDS ..........| ........Contact

Compound 302-Plus

Application Instructions:
  • Stir or shake well for uniform consistency.
  • Apply Compound 302 Plus onto the weldment, weld-burn, or heat-tinted area by acid brush or plastic spatula.
  • Leave it on for approximately 10 to 20 minutes; then rub with a stainless steel brush or piece of cloth in the direction of the grain on the surface.
  • Wipe with a wet sponge or use water rinse.
  • Repeat application if required.
Area of Application:

Compound 302 Plus is an innovative chemical formulation of gel-like consistency containing deoxidizing and surface active agents in addition to a passivating chemical to restore the unique properties that may be corrupted during the welding process. It effectively removes heat-tint, weld-burn, discoloration (including blueing) and rust from all grades of stainless steel.

Properties:

  • Appearance and odor:  Gel consistency with mineral acid undertone.
  • Specific gravity: 1.46
  • pH of 1% solution: 1 - 2
  • Fluorides: Yes
This information is believed to be authentic and correct as determined by laboratory and field-testing. No warranty or guaranteed results are express or implied due to application circumstances and usage beyond the control of the seller or manufacturer.

Arcal Chemicals, Inc.223 Westhampton Avenue Capitol Heights, MD 20743 Map Tele: 301.336.9300 Fax: 301.336.6597

Copyright Arcal Chemicals, Inc. 2001